Kubota CU3000 / Kverneland CLC Series

from 3.0 to 4.0 m, working 5 to 30 cm deep

the full range of following implements. The 3-row configuration allows all combinations via the parallelogram of the machine. The various levelling devices are available on a H-frame which also receives the rollers. This H frame is fixed by 4 bolts and allows the combination of all sorts of equipment with the same implement in order to adjust the machine to the season or the operation requested which makes the machine completely versatile.

The 3-row design supports the intensive mixing and ensures a good distribution of the straw over the whole working width. This allocation of the tines together with the high underbeam clearance of 34 1/4” (870mm) allows the free flow of material without the risk of blockage even in case of long and fibred residues such as corn, etc ... The easy material flow with the 3-row frame also reduces the power requirements and the fuel consumption whilst ensuring a good cutting quality at the same time.